Titanium Driver D3305Ti DPD


Where to buy

The D3305Ti DPD model drom Selenium Loudspeakers is an ultra high quality compression driver for professional use wherever high SPL and low distortion are of great concern.  Pure titanium specially designed diaphragm with IPF (Impregnated Polymer Fiber) surround, for high sensitivity, low distortion and smooth extended frequency response  applications.

The D3305Ti DPD is recommended for use in arenas, stage monitors, side fills and sound reinforcement systems. Optimized aluminum injected phase plug avoids phase cancellation problems. High flux density magnetic assembly.

Protection circuit DPD (Driver Protection Device). This circuit uses a PTC and a HPCCR resistor assuring more reliability under overload condition.

The flat wire voice coil (copper clad aluminum) uses a high temperature Kapton former. Precisely engineered diaphragm structure and alignment mechanism allow for easy, reliable and cost effective repair in case of diaphragm failure. In the rare case a repair (model RPD3300Ti) may be necessary, please read carefully the instructions supplied and be sure to correctly follow the items step by step. If you are not willing to make the repairs, International Audio is the authorized repair center for the USA.

With a 2" exit throat and standard bolt pattern, it directly couples to Selenium horns with (50 mm) throats.

Also available in 16ohm – D3305Ti DPD 16r



 General Information

International Audio is your authorized repair center for Selenium Loudspeakers

D3305Ti DPD

  • Specifications: 
  • Nominal Impedance 8 OHMS (Avail in 16ohms)
  • Power Handling: 150 W (w/ 800Hz Crossover)
  • Sensitivity: 108db 1W/1M
  • Frequency Response 500Hz-20kHz
  • Magnet Weight: 57oz
  • Voice Coil 3"
  • Gross Weight: 13.17 lbs

More Information - Recommended Accessories

Compatible Horns

HL 14-50 | HL 4750 SLF | HM39-50 | HM 4750

Manufacturers Tech Data PDF

Where to buy

Selenium Loudspeakers, Distributed by International Audio